ADC ADCP-80-412, User Manual

Page: 1 / 10

ADCP-80-412
x
Issue 1
x
April 2000
1074399 Rev A Page 1
”
2000, ADC Telecommunications, Inc.
DSX Bay Tracer Illuminator
User Manual
13914-B
Content Page
INTRODUCTION
..........................................................................
1
Revision History
.....................................................................
2
Trademark Information
................................................................
2
Admonishments
.....................................................................
2
Certification
........................................................................
2
1 PRODUCT DESCRIPTION
...............................................................
2
2 SPECIFICATIONS
.....................................................................
3
3 INSTALLATION
......................................................................
3
4 OPERATIONAL CONSIDERATIONS
.........................................................
7
5 TROUBLESHOOTING
..................................................................
7
6 CUSTOMER INFORMATION AND ASSISTANCE
.................................................
8
INTRODUCTION
This guide describes the ADC DSX Bay Tracer Illuminator option used in large DSX-1 or
DSX-3 environments to enable technicians to locate far end LED tracer lamps more quickly.
The Bay Tracer Illuminator option consists of a stand-alone electronic sensor device that
mounts on the top of a DSX-1 or DSX-3 bay, and an inductive pick-up coil that mounts on
one or more –48 Vdc power input conductors feeding the bay fuse panel. Power to operate the
Bay Tracer Illuminator option is obtained from a branch of the same –48 Vdc central office
source that powers the components in the DSX-1 or DSX-3 bay.