GPS SPEEDOMETER INSTALLATION
Antenna Placement
If you are using the supplied antenna, find a mounting location that will maintain an
unobstructed view of
the satellites.
Hidden installation of the antenna is possible and can be determined by temporarily mounting
the
antenna in the desired location and checking the signal.
Due to the differences in dash or deck thickness and materials, results are difficult to predict.
The signals
will not pass through metal, but may pass through glass and plexi windshields.
Additionally, try to keep the antenna away from any aluminum or stainless frames.
1.
Once a location is chosen, drill a 3/8" (9.5 mm) opening in the mounting panel.
2.
Slide the antenna cable in to the opening and secure the antenna with a screw or double
sided tape.
If you are using an alternative antenna, make certain that its NMEA
0183 and that the wiring is
compatible with the gauge.
Wire Connection
White
Signal
(NMEA 0183 output)
Red
Switched 12V power
Black
Good engine ground
Mega and Race Series, Industrial Series Models
PART # GPSS and GPSL all colors
715 Center Street
Grayslake IL 60030
P: 847-752-2700
F: 847-752-2415
LIT-
GA-
ANLG-GPS
REV A
ECO 28610
1
OF
5
