190-00820-11 Rev. A
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
645
ADDITIONAL FEATURES
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
8.10 SCHEDULER
The Scheduler feature can be used to enter and display reminder messages (e.g., Change oil, Switch fuel tanks,
or Altimeter-Transponder Check) in the Messages Window on the PFD. Messages can be set to display based on
a specific date and time (event), once the message timer reaches zero (one-time; default setting), or recurrently
whenever the message timer reaches zero (periodic). Message timers set to periodic alerting automatically reset
to the original timer value once the message is displayed. When power is cycled, all messages are retained until
deleted, and message timer countdown is resumed.
Figure 8-122 Scheduler (Utility Page)
Entering a scheduler message:
1)
Select the AUX - Utility Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to
highlight the first empty scheduler message naming field.
4)
Use the
FMS
Knob to enter the message text to be displayed in the Messages Window and press the
ENT
Key.
5)
Press the
ENT
Key again or use the large
FMS
Knob to move the cursor to the field next to Type.
6)
Turn the small
FMS
Knob to select the message alert type:
• Event—Message issued at the specified date/time
• One-time—Message issued when the message timer reaches zero (default setting)
• Periodic—Message issued each time the message timer reaches zero
7)
Press the
ENT
Key again or use the large
FMS
Knob to move the cursor to the next field.
8)
For periodic and one-time message, use the
FMS
Knob to enter the timer value (HH:MM:SS) from which to
countdown and press the
ENT
Key.
9)
For event-based messages:
a)
Use the
FMS
Knob to enter the desired date (DD-MM-YY) and press the
ENT
Key.
b)
Press the
ENT
Key again or use the large
FMS
Knob to move the cursor to the next field.
c)
Use the
FMS
Knob to enter the desired time (HH:MM) and press the
ENT
Key.
10)
Press the
ENT
Key again or use the large
FMS
Knob to move the cursor to enter the next message.
