Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
190-00820-11 Rev. A
340
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
CELL MOVEMENT
The Cell Movement weather product (Figure 6-20) shows the location and movement of storm cells as
identified by the ground-based system. Cells are represented by yellow squares, with direction of movement
indicated with short, orange arrows.
Figure 6-20 Cell Movement Data
Storm Cells
NOTE:
The Storm Cell base height is not available if a GDL 69A SXM data link receiver is installed. In this
case, the Storm Cell base height is displayed as 0 feet when the map pointer selects a storm cell.
On most applicable maps, the Cell Movement weather product is selected for display along with NEXRAD.
On the Weather Data Link (XM) Page, Cell Movement can be selected independently.
Displaying Cell Movement information:
1)
Press the
MAP
Softkey (for the PFD Inset Map, select the
INSET
Softkey). This step is not necessary on the
Weather Data Link (XM) Page.
2)
Press the
NEXRAD
Softkey (
CEL MOV
Softkey on the Weather Data Link (XM) Page). For Cell Movement to
be displayed on maps other than the Weather Data Link (XM) Page, Cell Movement must be turned on in the
Navigation Map Setup Menu (see “Setting Up SiriusXM Weather”).
To display the Cell Movement legend on the Weather Data Link (XM) Page, (Figure 6-21), press the
LEGEND
Softkey when Cell Movement is selected for display.
Figure 6-21 Cell Movement Legend
