Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
190-00820-11 Rev. A
264
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
3)
Select the
VNV Direct-To
Softkey; or press the
MENU
Key, highlight ‘VNV Direct-To’, and press the
ENT
Key.
An ‘Activate vertical Direct-to to: NNNNNFT at XXXXXX?’ confirmation window is displayed.
4)
Press the
ENT
Key. Vertical guidance begins to the altitude constraint for the selected waypoint.
5)
Press the
FMS
Knob to remove the flashing cursor.
The vertical navigation profile can be modified by directly entering a vertical speed target (VS TGT) and/or flight
path angle (FPA) in the CURRENT VNV PROFILE box.
Modifying the VS TGT and FPA using the FMS Knob:
1)
Press the
FPL
Key to display the Active Flight Plan Page on the MFD.
2)
Press the
VNV PROF
Softkey; or press the
MENU
Key, highlight ‘Select VNV Profile Window’, and press the
ENT
Key. The cursor is now located in the CURRENT VNV PROFILE box.
3)
Turn the
FMS
Knobs as needed to edit the values.
4)
Press the
FMS
Knob to remove the flashing cursor.
Modifying the VS TGT and FPA using the Quick Select Box:
1)
Press the
FPL
Key to display the Active Flight Plan Page on the MFD.
2)
Use the Joystick to place the Quick Select Box on VS TGT or FPA.
3)
Enter the values using the alphanumeric keys on the PFD/MFD Control Unit and press the
ENT
Key.
ALTITUDE CONSTRAINTS
Perspective can use altitude constraints associated with lateral waypoints to give guidance for vertical
navigation. These altitudes are, depending on the specific instance, manually entered or retrieved from the
published altitudes in the navigation database. The navigation database only contains altitudes for procedures
that call for “Cross at” altitudes. If the procedure states “Expect to cross at,” then the altitude is not in the
database. In this case the altitude may be entered manually.
Large Cyan Text
Small White Text with
Altitude Restriction Bar
Large White Text
Small Cyan Subdued
Text
Small Cyan Text
Figure 5-95 Waypoint Altitude Constraints
Cross AT
or ABOVE
5,000 ft
Cross AT
or BELOW
3,000 ft
Cross AT
2,300 ft
Altitude Constraint
Examples
Displayed Text
Examples
