190-00820-11 Rev. A
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
215
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Pressing the PFD
ALERTS
Softkey displays the message window on the PFD. The following airspace alerts are
displayed in the message window:
Message
Comments
INSIDE ARSPC
– Inside airspace.
The aircraft is inside the airspace.
ARSPC AHEAD
– Airspace ahead – less
than 10 minutes.
Special use airspace is ahead of aircraft. The aircraft penetrates the airspace
within 10 minutes.
ARSPC NEAR
– Airspace near and ahead. Special use airspace is near and ahead of the aircraft position.
ARSPC NEAR
– Airspace near – less than
2 nm.
Special use airspace is within 2 nm of the aircraft position.
Table 5-6 PFD Airspace Alert Messages
The Smart Airspace function de-emphasizes airspaces above or below the current aircraft altitude. The function
does not require the aircraft present position or flight path to enter the lateral boundaries of the airspace. If the
current aircraft altitude is within 1100 feet of the vertical boundaries of the airspace, the airspace boundary is
shown normally. If the current aircraft altitude is not within 1100 feet of the vertical boundaries of the airspace,
the airspace boundary is shown subdued.
Figure 5-51 Smart Airspace
Smart Airspace Off
Smart Airspace On
Turning smart airspace on or off:
1)
Use the
FMS
Knob to select the Navigation Map Page.
2)
Press the
MENU
Key, and press the
ENT
Key. The cursor is placed in the ‘GROUP’ Box.
3)
Turn the small
FMS
Knob to highlight the ‘Aviation’ in the ‘GROUP’ Box and press the
ENT
Key.
4)
Turn the large
FMS
Knob to highlight the ‘SMART AIRSPACE’ field in the Aviation Map Setup Window.
5)
Turn the small
FMS
Knob clockwise to turn smart airspace ON or counterclockwise to turn smart airspace OFF.
6)
Press the
FMS
Knob to remove the flashing cursor.
