190-02692-00 Rev. A
Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
27
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
P
ilot
P
rofiles
System settings may be saved under a pilot profile. Each time the system is powered on, the last selected
pilot profile is shown on the MFD Start-up Screen. The system can store up to 25 profiles. The currently
active profile, the amount of memory used, and the amount of memory available are shown at the top of the
AUX – SYSTEM SETUP Page in the box labeled PILOT PROFILE. From here, pilot profiles may be created,
selected, renamed, or deleted.
Figure 1-17 Pilot Profile Settings on AUX – SYSTEM SETUP Page
Creating a profile:
1)
Use the
FMS
Knob to select the AUX – SYSTEM SETUP Page.
2)
Push the
FMS
Knob to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight ‘CREATE’ in the PILOT PROFILE Box.
4)
Press the
ENT
Key. A CREATE PROFILE Window is displayed.
5)
Use the
FMS
Knob to enter a profile name up to 16 characters long and press the
ENT
Key. Pilot profile names
cannot begin with a blank as the first letter.
6)
In the next field, turn the small
FMS
Knob to select the desired settings upon which to base the new profile.
Profiles can be created based on Garmin factory defaults, default profile settings (initially based on Garmin
factory defaults unless edited by the pilot), or current system settings.
