Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
190-02692-00 Rev. A
234
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
2)
To select another airport, push the
FMS
Knob to activate the cursor, enter an identifier/facility name/city, and
press the
ENT
Key.
3)
Turn the large
FMS
Knob to highlight the procedure. The procedure is previewed on the map.
4)
Turn the small
FMS
Knob to view the available procedures. Press the
ENT
Key to select the procedure. The
cursor moves to the next box (runway or transition). The procedure is previewed on the map.
5)
Turn the small
FMS
Knob to view the available runway or transition. Press the
ENT
Key to select the runway or
transition. The cursor moves to the next box (if available). The procedure is previewed on the map.
6)
Repeat Step 5, until desired information has been viewed for the chosen procedure.
7)
Press the
INFO-1
or
INFO-2
Softkey to return to the WPT – AIRPORT INFORMATION PAGE.
DEPARTURES
A Departure Procedure (DP) is loaded at the departure airport in the flight plan. Only one departure can be
loaded at a time in a flight plan. If a departure is loaded when another departure is already in the active flight
plan, the new departure replaces the previous departure. The route is defined by selection of a departure, the
transition waypoints, and a runway.
Loading a departure into the active flight plan using the
PROC
Key:
1)
Press the
PROC
Key. The PROCEDURES Window is displayed.
2)
Highlight SELECT DEPARTURE.
3)
Press the
ENT
Key. The PROC – DEPARTURE LOADING Page is displayed.
4)
Use the
FMS
Knob to select an airport and press the
ENT
Key.
5)
Select a departure from the list and press the
ENT
Key.
6)
Select a runway (if required) and press the
ENT
Key.
7)
Select a transition (if required) and press the
ENT
Key. LOAD? is highlighted.
8)
Press the
ENT
Key to load the departure procedure.
