190-00595-01 Rev. B
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
41
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& cNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Setting the generic timer (PFD):
1)
Press the
TMR/REF
Softkey.
2)
Turn the large
FMS
Knob to select the timer field (hh/mm/ss).
3)
Use the
FMS
Knob to enter the desired time and press the
ENT
Key.
4)
With the UP/DN field highlighted, turn the small
FMS
Knob to select the timer counting direction (UP/DN) and
press the
ENT
Key.
6)
With ‘START?’ highlighted, press the
ENT
Key to start the timer. The field changes to ‘STOP?’.
7)
To stop the timer, press the
ENT
Key with ‘STOP?’ highlighted. The field changes to ‘RESET?’.
8)
To reset the timer, press the
ENT
Key with ‘RESET?’ highlighted. The field changes back to ‘START?’ and the
digits are reset.
9)
To remove the window, press the
CLR
Key or the
TMR/REF
Softkey.
Figure 1-38 Generic Timer (PFD Timer/References Window)
Setting the generic timer (MFD AUX - Utility Page)
1)
Use the
FMS
Knob to select the AUX - Utility Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the small
FMS
Knob to select the timer counting direction (UP/DN) and press the
ENT
Key.
4)
If a desired starting time is desired:
a)
Use the large
FMS
Knob to highlight the HH:MM:SS field.
b)
Use the
FMS
Knob to enter the desired time and press the
ENT
Key.
5)
Turn the large
FMS
Knob to highlight ‘START?’ and press the
ENT
Key to start the timer. The field changes to
‘STOP?’.
6)
To stop the timer, press the
ENT
Key with ‘STOP?’ highlighted. The field changes to ‘RESET?’.
7)
To reset the timer, press the
ENT
Key with ‘RESET?’ highlighted. The field changes back to ‘START?’ and the
digits are reset.
