Garmin Beechcraft A36, Pilot'S Manual

Page: 184 / 496

190-00595-01 Rev. B
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
173
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Renaming user waypoints:
1)
Highlight a user waypoint in the User Waypoint List. Press the RENAME Softkey, or press the MENU Key and
select ‘Rename User Waypoint’
2) Enter a new name.
3)
Press the ENT Key. The message ‘Do you want to rename the user waypoint AAAAAA to BBBBBB?’ is
displayed.
4) With ‘YES’ highlighted, press the
ENT
Key.
5)
Press the FMS Knob to remove the flashing cursor.
Changing the location of an existing waypoint to the aircraft present position:
1) Enter a waypoint name or select the waypoint in the User Waypoint List, then press the
ENT
Key.
2) Press the
MENU
Key.
3)
Select ‘Use Present Position’.
4) Press the ENT Key twice. The new waypoint’s location is saved.
5) Press the
FMS
Knob to remove the flashing cursor.
A system generated comment for a user waypoint incorporates the reference waypoint identifier, bearing,
and distance. If a system generated comment has been edited, a new comment can be generated.
Resetting the comment field to the system generated comment:
1) Enter a waypoint name or select the waypoint in the User Waypoint List, then press the
ENT
Key.
2) Press the MENU Key.
3) Select ‘Auto Comment’.
4) Press the
ENT
Key. The generated comment is based on the reference point used to define the waypoint.