19
Leaders in Sealing Integrity
2.4 Marketing
The Garlock valve is marked on the type label / on the body with the following data:
Type Label
Line For
Marking
GAR-SEAL
111-W-MT
EN-JS1049 - PTFE - PTFE
DN 150-6
„
PN 16
Ps=16 bar Tsmax=200 C
06-05-2555
GARLOCK GmbH D-41468 NE.
0035
1
Type of valve
GAR-SEAL
2
Type key
111-W-MT
3
Material body/
lining/disc
EN-JS1049 (0.7043) / PTFE / PTFE
4
Nominal width pressure stage
DN 150 – 6“ PN 16
5
Max. per. pressure, max. per. temp Ps 16 bar Ts max 200 °C
6
Serial No. (year of construction)
Numbers 1-2: year, Numbers 3-4:
month, Number 5-8: serial no.
7
For customer-specific marking
8
Garlock address
Garlock GmbH, 41468 Neuss
9
Conformity ID-no.
named place
CE (conf. 2014/68/EU) 0035 (TÜV
Rheinland Industrie Service GmbH)
3 Transport and storage
The Garlock GAR-SEAL valve must be handled, transported and stored with care:
– The valve must be stored and transported in its closed original packaging (including to the place of
installation).
– The packaging protects the sensitive lining of the valve from damage.
– If the valve is stored before it is installed it should be stored in a closed room and be protected from dirt,
humidity or ozone.
– The sealing surfaces of the flange ends for the piping connection are not damaged, neither by mechanical
nor by other influences.
– Do not stack valves!
– The Garlock valve is supplied with slightly open valve disc (transport position approx. 10°). Therefore, it
must be stored in the way it is supplied. The locking valve must not be operated.
Type Label
Line For
Marking
MOBIL-SEAL
111-W-TW-MT
EN-JS1049 - PTFE - PTFE
DN 050-2” PN 10
Ps=10 bar T -40 / +160 C
21-05-2555
14432-2014
GARLOCK GmbH D-41468 NE.
0035
ADR/RID 2021
1
Type of valve
MOBIL-SEAL
2
Type key
111-W-TW-MT
3
Material body/
lining/disc
EN-JS1049 (0.7043) / PTFE / PTFE
4
Nominal width pressure stage
DN 050 – 2“ PN 10
5
Max. per. pressure, max. per. temp Ps 10 bar T -40 / +160 °C
6
Serial No. (year of construction)
Numbers 1-2: year, Numbers 3-4:
month, Number 5-8: serial no.
7
Norm
EN 14432 - 2014
ADR/RID in the valid version
8
Garlock address
Garlock GmbH, 41468 Neuss
9
Conformity ID-no.
named place
CE (conf. 2014/68/EU) 0035 (TÜV
Rheinland Industrie Service GmbH)
Attention
Do not take off manual lever, gearing or drive while being in operation situation of pressure!
Summary of Contents for GAR-SEAL
Page 2: ......
