USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
6.12 Selective Bypass Filter
The Selective Bypass filter provides the ability to filter and Bypass packet between Net0/Net1
based on IP/MPLS tag/VLAN id (It is possible to set the filter to specific value or the range by
entering mask value) For MLPS and IP - it is possible to set the upstream (net0 to Net1)
or/and downstream (Net1 to Net0).
Selective bypass commands: set_slct_bypass - enable/disable , show_slct_bypass ,
add_slct_bypass , del_slct_bypass
Example:
Garland Technology | 716.242.8500 |
37