USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
6.42 Firmware Update
Follow the instructions on the firmware update user guide to perform the firmware update:
●
ibs10g.ppc1_fw_update_xxxdoc – IBS10G with PPC rev 1.0
●
ibs10g.ppc2_fw_update_xxx.doc – IBS10G with PPC rev 2.1
●
ibsg.ppc1_fw_update_xxx.doc – IBSG with PPC rev 1.0
●
ibsg.ppc2_fw_update_xxx.doc – IBSG with PPC rev 2.1
SCP protocol supported by firmware update:
update user@ScpSrvIP:[Path_to_fw_update] [force]
NOTE: If the firmware update process is interrupted, your IBS may not function
properly. We recommend the process be done in an environment with a steady power
supply (preferably with UPS).
6.43 Reboot
The reboot command forces a reboot of the IBS.
Example:
6.44 Module power off
The command power_off , causing the individual IBS module to be powered off.
It enable the user to replace individual IBS module while the rest of the IBS modules on the
same 1U chassis are powered on up and running.
This command is supported only with hardware version 0.3.0.0.11 and up.
Example:
Garland Technology | 716.242.8500 |
56
