USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
SSH, WEB or SNMP applications should be reconfigured to use new IP address
8.5.5.2 Netmask
The System Netmask IP address is Ethernet management port net mask address.
The new Netmask IP address will take effect only after device reboot.
Remote control via telnet, SSH, WEB or SNMP applications should be reconfigured to
use new NETMASK IP addresses.
8.5.5.3 Default gateway
The default gateway IP address is the Ethernet management port default gateway
address.
The new default gateway IP address will take effect only after device reboot.
Remote control via telnet, SSH, WEB or SNMP applications should be reconfigured to
use new gateway IP addresses.
8.5.5.4 Permitted Network IP list
There are two fields which controls the permitted IP address:
1) Operations
2) Permitted IP
The operation filed control the operation to be performed (view, set, remove)
When view operation is selected, the “Permitted IP” window will display the current
permitted IP ranges.
When “set” operation is selected, the “Permitted IP” will enable the user to enter new
permitted IP range in the following format:
nnn.nnn.nnn.nnn/mask
For example:
192.168.2.0/24
10.0.0.0/8
When “remove” operation is selected, the “Permitted IP” window will display the
current permitted IP range that can be removed. The user can select one of the
IP ranges to be removed or to select “all” ranges.
Garland Technology | 716.242.8500 |
116
