USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
6.41 Set default parameters (set_default)
Restore the factory default settings for all parameters including system user name and
password. Command does not restore rs232 port speed.
Example:
The factory default settings are:
●
IP address: 192.168.0.100
●
Net mask: 255.255.255.0
●
Gateway: 192.168.0.1
●
hb_act_mode: on
●
hb_exp_state: bypass
●
Keep heartbeat active mode: disabled
●
hb_interval : 5 ms
●
hb_holdtime: 20 ms
●
hb_tx_dir: mon0
●
hb_fail: unidir
●
enable snmp traps: disabled all snmp trap -
●
snmp server ip: 192.168.0.6
●
snmp version: 1
●
WEB expired time: 900 sec
●
WEB https: disabled
●
TFTP server ip: 192.168.0.6
●
SNMP user: admin
●
SNMP password: gtadmin1
●
Unit name: ibs
●
TFTP root: tftpboot
●
Two port link: disabled
●
M2N : off
●
Advanced link: off
●
Expire state: Bypass
●
Management port: enabled
●
Heartbeat active mode: ON
●
System user: admin
●
System user password: gtadmin1
●
Heartbeat packet transmit direction: mon0
●
Heartbeat packet fail criteria: unidir
●
Ethernet Management port parameters: auto
●
Remote log state: disabled
Garland Technology | 716.242.8500 |
54
