USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
5.4 Connecting the RS232 DB9 management cable
1. Connect the RS232 DB9 cable supplied with the IBS to the IBS Management RS232 port
2. Connect the other side of the RS232 cable to your Appliance RS232 port.
3. Use any terminal emulation software (Minicom, HyperTerminal …) to connect to the CLI
interface to in order manage the IBS.
4. Set the following terminal communication parameters:
- 115200 – default or 9600 if set by CLI command
- 8 bits
- no parity
- 1 stop bit
- no flow control
5. Power on the IBS
6. Login prompt will appear in the terminal window.
7. The login name: admin, the default password: gtadmin1
8. After login you should change password, user and date. If you plan to use
management Ethernet port, set IP address, net mask and gateway parameters.
5.5 Connecting the Ethernet management port
1. Connect Ethernet cable (CAT5) to the Management 1G Ethernet network port
2. Use any Telnet or SSH client to connect to the CLI interface in order to manage the IBS
3. The following are the default IP and login parameters:
- IP address: 192.168.0.100
- Net mask: 255.255.255.0
- Gateway: 192.168.0.1
- Login name: admin
- Password: gtadmin1
4. The following are default snmp user/community name and password (for snmp 3 and
)
- user/community name: admin
- password: gtadmin1
Garland Technology | 716.242.8500 |
27
