![background image](http://html1.mh-extra.com/html/gardner-denver/integra-efa99f/integra-efa99f_operating-and-service-manual_563798030.webp)
13-8-639 Page 30
NOTICE
The basic display can be entered from all menus by depressing the reset key.
The basic display will also return after one minute, if the panel is not used.
The following are the compressor running modes:
DISPLAY
RUNNING MODE
Off illuminated
Compressor switched off
Off flashing slowly
Compressor in blowndown mode
Off flashing quickly
Stop command given, compressor running
unloaded before stopping.
On illuminated
Compressor switched on
On flashing quickly
Compressor in automatic mode and can start at
any time.
Use the scroll key ( ) to get the following information:
DISPLAY
RUNNING MODE
Pressure light on (1)
Discharge pressure
Temperature light on (2)
Compressor temperature
Operating hours light on (3)
Operating hours
Operating hours flashing (3) Loaded hours flashing
Change Oil light on (4)
Change oil
Air filter light on (5)
Replace air filter
Oil separator light on (6)
Replace air/oil separator
Oil filter light on (7)
Replace oil filter
No lights on
Compressor running mode on display
USER MENU
- To enter the User Menu from the basic display when the compressor is stopped,
simultaneously push the up arrow and the down arrow keys and hold for 5 seconds, until all the indicator
lights on the display start flashing, then select code 01.
Use the scroll key ( ) to select the desired option for programming. The numerical values can be
changed with the up arrow or the down arrow keys. The value flashes on the display to indicate change.
When the flashing stops, the value becomes the new setting.
The following can be programmed through the User Menu.
Setting the unload pressure:
The pressure indicator light and the upper left segment of the display illuminate when the unload
pressure is in the programming mode.
The discharge pressure shifts as the unload pressure is changed (the pressure differential remains
constant).
Summary of Contents for INTEGRA EFA99F
