13-8-639 Page 62
14. Apply a thin coat of Loctite 609 to the shaft surface that will be against the inside of the sleeve, press
the sleeve into place and install the sheave using the mounting bolt. Hold the sheave in place with
Gardner Denver tool EFC03476918 and tighten the left handed bolt to 60 ft-lbs (80 Nm).
15. Replace the old belts with new ones. For proper belt life, use only genuine Gardner Denver belts.
16. Remove the locking pin (Item 2 in Figure 7-1, page 58) and lower the motor. The weight of the motor
keeps the belts properly tensioned.
17. Check the sheave alignment.
18. Replace the enclosure and close the top enclosure door.
Summary of Contents for INTEGRA EFA99F
