13-8-639 Page 29
306EAU1255-A
(Ref. Drawing)
Figure 4-3 – AIRPILOT ELECTRONIC CONTROLLER
PROGRAMMING AND SETUP INSTRUCTIONS FOR THE AIRPILOT ELECTRONIC CONTROLLER
The AIRPILOT ELECTRONIC CONTROLLER has five menus, three of which can be accessed by the
operator.
The other menus contains the factory settings of the compressor. Access to the factory settings menu
requires a special code. See Figure 4-3, for a diagram of how the menus are setup.
The basic display menu shows the compressor’s running mode and information on the compressor’s
various functions.
The other menus are for programming. Programming and setup is accomplished with the program keys,
see Figure 4-2, page 28. The programming menus are accessed by simultaneously depressing the up
arrow and the down arrow keys and holding for 5 seconds. All indicator lights will light up and the display
will start flashing. The 3 different menus can then be chosen using the up arrow key. The up arrow key
and the down arrow key will increase or decrease displayed numeric values, step through the top level
menus or if pushed simultaneously will enable the user to go into the program mode. The top level menu
is 01 for the user menu, 02 is for the service menu and 03 is for the multipilot menu. The scroll ( ) key
will enable the user to go through the various menu options, to change the numeric value on the display,
use the up arrow or the down arrow keys. The value on the display starts flashing to indicate it is being
changed. The flashing stops when the value is changed.
Summary of Contents for INTEGRA EFA99F
