![background image](http://html1.mh-extra.com/html/gardner-denver/integra-efa99f/integra-efa99f_operating-and-service-manual_563798059.webp)
13-8-639 Page 59
REPLACING THE COMPRESSOR BELTS
1. Disconnect, tagout and lockout the power supply to the starter.
2. Open the top enclosure door and remove the enclosure around the motor.
3. Raise the motor, until the locking pin (2) can be inserted through the slot (3) and into the hole (4) in
the bracket.
4. Remove the belts (1).
5. Install new belts (1).
6. Remove the locking pin (2) and lower the motor. The weight of the motor keeps the belts properly
tensioned.
7. Check sheave alignment.
8. Replace the enclosure and close the top enclosure door.
CAUTION
Interference between the fan and the orifice can damage equipment. Be certain
the orifice has even clearance around the fan before starting the unit.
REPLACING THE MOTOR SHEAVE
1. Disconnect, tagout and lockout the power supply to the starter.
2. Open the top enclosure door and remove the enclosure around the motor.
3. Raise the motor, until the locking pin (2) can be inserted through the slot (3) and into the hole (4) in
the bracket.
4. Remove the belts (1).
5. Remove the 2 screws in the motor bushing/sheave assembly and insert one in the jack bolt hole
(Figure 7-2).
Figure 7-2 – REMOVING THE MOTOR SHEAVE
Summary of Contents for INTEGRA EFA99F
