S
U
A
1800 909 909
www.globalpowerbrands.com email: [email protected]
AFTER SALES SUPPORT
43669
7
Operation safety instructions
WARNING.
Stop the engine and unplug the spark plug before any repairs or
maintenance operations.
• Check that all nuts, bolts and screws are well tightened before every use.
• Do not run the engine in an enclosed and/or poorly ventilated area. The gas of
the engine contains carbon monoxide, which is dangerous to your health.
• Work only when there is sufficient light.
• Do not use the blower when it is raining or when the grass is wet.
• Caution must be taken while blowing and vacuuming on slopes.
• Turn off the engine if you must leave the blower vac unattended.
• Never change the rated speed of the engine in any way.
• Stop the engine and remove the spark plug cover in these cases:
– Before any maintenance, repairing or checking operations.
– If you leave the blower vac unattended.
– If the blower vac vibrates in an abnormal way, take the blower vac to an
authorised service centre.
– Check the bolts and nuts regularly. Bolts and nuts may vibrate loose over time.
WARNING.
Fuel is highly flammable.
• Keep fuel in a jerry can specially made for this purpose.
• Fill the fuel tank with a funnel and outside. Do not smoke or use a mobile phone
during this process.
• Fill with Fuel oil mix before starting the engine. Never open the cap of the fuel
tank to add gasoline while the engine is running or still hot.
• Do not start the engine if there is spilt fuel on the blower vac or in the area
surrounding. Take the blower away from the zone where fuel has been spilt and
avoid any contact from a hot source as long as the spilt gasoline is completely
evaporated.
• Tighten the fuel tank cap and jerry can cap tightly.
General Information & Safety Instructions
2