background image

1800 909 909 

www.globalpowerbrands.com      email: [email protected] 

AFTER SALES SUPPORT 

43669

3

Introduction

Your new Gardenline

®

 Blower Vac will more than satisfy  

your expectations. It has been manufactured under stringent 
Gardenline

®

 Quality Standards to meet superior performance 

criteria.

You will find your new blower vac easy and safe to operate, and, with proper 
care, it will give you many years of dependable service.

 CAUTION. 

 Carefully read through this entire instruction manual before using 

your new Gardenline

®

 Blower Vac. Take special care to heed the Cautions and 

Warnings.
Your Gardenline

®

 Blower Vac has many features that will make your job faster and 

easier. Safety, performance, and dependability have been given top priority in the 
development of this blower vac, making it easy to maintain and operate.

Environmental protection

Recycle unwanted materials instead of disposing of them as waste.  
All tools, hoses and packaging should be sorted, taken to the local 
recycling centre and disposed of in an environmentally safe way.

What your 3 year warranty means

Great care has gone into the manufacture of this product and it should there-
fore provide you with years of good service when used properly.  In the event of 
product failure within its intended use over the course of the first 3 years after 
the date of purchase, we will remedy the problem as quickly as possible once it 
has been brought to our attention. In the unlikely event of such an occurrence, or 
if you require any information about the product please contact us via our after 
sales support services, details of which can be found in this manual and on the 
product itself.
After Sales Support      TEL: 1800 909 909

1

YEAR WARRANTY

Summary of Contents for PBV26CC

























Reviews: