background image

1800 909 909 

www.globalpowerbrands.com      email: [email protected] 

AFTER SALES SUPPORT 

43669

14

Mixing the fuel

ENGINE FUEL: MIX AT 40:1  

 WARNING. 

 When mixing fuel it is recommended to  

wear eye protection, and to mix fuel in a well ventilated location. 

 IMPORTANT. 

 Use good quality air cooled 2-stroke engine oil.

This product is powered by a 2-stroke engine and requires the pre-mixing of fuel 
with 2-stroke oil.

1. Use fresh unleaded petrol and a good grade of 2-stroke oil for air cooled  

2-stroke engines.

2. Mix the petrol and oil in an approved container. Never mix fuel directly in the 

blower fuel tank.

A fuel mixing container is provided with this blower.

 Directions. 

 Place the plastic mixing bottle on a level surface. 

Fill with unleaded fuel in the container to the top 500 marker  

in the column GAS.
Then with 2-stroke oil, fill to the top line maker in the 40:1 

column. Replace the cap on the mixing bottle and shake the 

container to mix the fuel and oil.
The fuel is now correctly mixed at 40:1 and is ready to be 

poured into the petrol tank of the blower.

 NOTE, 

 this container provided is NOT a fuel storage container.

 WARNING. 

 Never use any type of pre-mixed fuel/oil direct from fuel stations. 

This may include special blends intended for use in mopeds, motorcycles, etc.

3. Mix the fuel thoroughly and also each time before fuelling.
4. Always pre-mix in small quantities. Never mix quantities larger than what will be 

used in a 30 day period.

 Note. 

 Do not store petrol in plastic containers. 

Keep fuel out of the reach of children.

Instructions

5

40:1

Summary of Contents for PBV26CC

























Reviews: