S
U
A
1800 909 909
www.globalpowerbrands.com email: [email protected]
AFTER SALES SUPPORT
43669
6
– If fuel is spilled, do not attempt to start the engine but move the machine away
from the area of spillage and avoid creating any source of ignition until the fuel
has evaporated and the vapour dispersed.
– Replace all fuel tanks and containers caps securely.
• Substitute faulty silencers.
• Before use, always inspect the machine and check that the screws are not worn
or damaged.
• It is advisable to wear suitable eye protection when operating the blower vac.
Maintenance and storage
• Keep all nuts, bolts and screws tight to be sure the equipment is in safe working
condition. Regular maintenance is essential for safety and performance.
• Never store the equipment with fuel in the tank inside a building where vapour
may reach a flame or a spark or a source of extreme heat.
• Allow the engine to cool before storing in an enclosed space.
• To reduce the fire hazard, keep the engine, exhaust silencer, battery compartment
(if applicable) and fuel storage area free of grass, leaves, or excessive grease.
• If the fuel tank has to be drained, this should be done outdoors and when the
engine is cool.
• For reasons of safety, do not use the equipment with worn or damaged parts.
Parts are to be replaced and not repaired. Parts that are not of the same quality
can damage the equipment and be dangerous for your safety.
• Fuel goes off fairly quickly. If you find your blower vac does not start, 1st change
the fuel in the tank with newly purchased fuel.
Service
• Have your power tool serviced by a qualified repair personnel using only
identical replacement parts. This will ensure that the safety of the power tool is
maintained.
General Information & Safety Instructions
2
