GAT ECO.Lock 7xxx F/ISO
Operation
www.gantner.com
HB_GAT-ECOLock-7xxxFISO--EN_12
35
You can repeat the last step using different data carriers to program these data carriers successively. To do this,
press the button in again with each data carrier within 5 seconds after removing the previous data carrier. If you wait
longer than 5 seconds, the reading process is terminated and the read data carriers are saved in the lock.
Deleting (removing authorization) data carriers
When deleting data carriers authorized to use a personal locker, it is only possible to delete all data carriers in the
GAT ECO.Lock 7xxx F/ISO at once.
► Close the locker door and hold it shut.
► Press the button of the GAT ECO.Lock 7xxx F/ISO in using the program data carrier for approximately 1
second.
o
The information on the data carrier is read.
► The GAT ECO.Lock 7xxx F/ISO enters into programming mode.
o
The LED ring flashes red until the program data carrier is removed. As soon as the program data
carrier has been removed, the LED ring flashes red/green and the lock is ready for the next step.
► Within 5 seconds, press the button of the GAT ECO.Lock 7xxx F/ISO in using the program data carrier for
approximately 1 second.
► When the action is successful, the LED ring flashes red 3 times and the GAT ECO.Lock 7xxx F/ISO switches
off.
o
All data carriers are now deleted from the GAT ECO.Lock 7xxx F/ISO and no longer have the
authorization to use the locker any more.
5.2.5 Personal Locker Expiry Date Mode
During check-in, the user receives a data carrier encoded with GANTNER data blocks. The FID is written onto the
“general” data block and the guest’s personal locker number together with the expiry date ("valid from" and "valid
to") are written onto the “locker” data block of the data carrier. Furthermore, an index value is written onto the
“locker” data block. The "valid from" date must always be valid, i.e., newer or equal to the date set in the GAT
ECO.Lock 7xxx F/ISO.
Upon first use of a locker, the expiry date ("valid to" date) and the current index value of the data carrier are stored
in the lock. The guest can lock and unlock the locker as required, starting from the "valid from" date and for as long
as the expiry date is not reached or exceeded.
NOTE!
GAT ECO.Lock 7xxx F/ISO does not adjust to daylight saving time automatically. This must be considered
when evaluating events and authorizing data carriers with an expiry date.
An unlimited number of data carriers (people) can use the same locker. The following conditions apply to the data
carriers in this mode:
-
The same locker number must be stored on the data carriers.
-
The same expiry date must be stored on the data carriers.
-
The same index value must be stored on the data carriers.
