GAT ECO.Lock 7xxx F/ISO
Operation
www.gantner.com
HB_GAT-ECOLock-7xxxFISO--EN_12
37
5.3 GAT ECO.Basic Set F/ISO
The following items are included in the GAT ECO.Basic Set F/ISO (Part No. 812528).
System data carriers:
-
Master data carrier (3 pieces, red)
-
Program data carrier (black)
-
Battery data carrier (blue)
-
Battery cover key for the GAT ECO.Lock 7xxx with battery data carrier function.
-
Reset data carrier (green)
-
Service data carrier (yellow)
Additional items:
-
3 m USB programming cable
-
GANTNER USB stick with configuration software
-
GANTNER lanyard
5.4 Summary of System Data Carriers
The data carriers included in the GAT ECO.Basic Set F/ISO are required to configure and maintain a GAT
ECO.Lock 7xxx F/ISO equipped locker system.
The system data carriers are coded to function with specific installations and will only function with the
respective system.
5.4.1 Master Data Carrier
The master data carriers can lock and unlock any GAT ECO.Lock 7xxx F/ISO
in a system. If a user’s data carrier is
lost, an emergency opening of the corresponding locker can be carried out using a master data carrier. Three
master data carriers are included in the basic set and they are only valid for the respective system.
NOTE!
The system operator must ensure that the master data carriers are stored in a safe and secure location.
If a master data carrier is lost, a new master data carrier can be ordered from GANTNER Electronic GmbH. Before
the new master data carrier is used, the original master data carriers must be deleted from the GAT ECO.Lock 7xxx
F/ISO (the number of a master data carrier is stored in the lock the first time the master data carrier is used). This is
carried out using the reset data carrier. Complete the following procedure:
► Press the locker door shut with one hand.
► Press the button of the GAT ECO.Lock 7xxx F/ISO in using the reset data carrier for approximately 1 second.
o
The information on the data carrier is read and the LED ring flashes red until the reset data carrier is
removed.
► Remove the reset data carrier from the button.
o
All master data carriers are now deleted from the lock. Next, the LED flashes green and red
alternately and the new master data carriers can be programmed.
