PARTS COMPOSITION
CUT OUT DRAWING FOR DOOR AND DOORJAMB
Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
ABOUT THE PRODUCT
STAINLESS STEEL Sliding Door Latch,
HC-30
、
HC-30H
(with indicator)
、
HC-30R
(double-sided thumb turn type) Installation Instruction
●
Stainless steel latch for sliding door.
●
Can be unlocked from outside in case of emergency.
PRECAUTIONS FOR USE
Make sure to follow the designated dimensions, specifications, and horizontal/vertical
angles. Make sure that the cabinet and door are not warped, since it may cause failure.
Make sure to check the screws for slack at regular intervals (one month from first usage,
half a year, and then one time every year is recommended).
Prohibited
Warning
Caution
Required
Meaning of symbols
Caution:
If not followed, injury or damage may result.
Both left and right hand.
※
2
23 mm of spindle is assembled into the body.
※
3
Process the parts according to the actual products.
1
Double-sided
thumb turn plate
（
HC-30R
）
Indicator
（
HC-30H only
）
Partition plate
（
HC-30 only
）
Countersunk head screw
※
1
Thumb
turn
A
Spindle
※
1
Latch body
Hook
Trigger
Strike
Strike box
Countersunk head
wood screw
3.5
×
20
Door thickness Thread length Spindle
Length
※
2
Type
28
-
31
12
23
HC-30
HC-30H
HC-30R
32
-
36
17
27
37
-
40
22
32
41
-
44
25
35
HC-30R
Only
45
-
48
27
39
49
-
52
32
43
Parts to be chosen according to the door thickness
(※
1
)
Align the vertical and horizontal centerlines for both mortises.
Doorjamb (for strike and strike box)
Door (for latch body)
15
(16.5)
10.5
9
30
(3.6)
※
3
53
(3)
※
3
14.5
66
66
65
33
15
15
80
(95.5)
※
3
66 80
(95.5)
※
3
(16.5)
Centerline
Centerline
Door thickness
Through hole,
I
38
