GAT Access 6100 Terminal Series
Commissioning & Configuration
www.gantner.com
HB_GAT-ACCESS6100--EN_14
57
Locker 2
Read
Indicates, if data must be read from the second locker
segment of data carriers.
Boolean
true
Position on card
Defines the segment where locker data 2 is located on
a data carrier
Integer
1 .. 255
Clear number
Clear the locker number from the data carrier.
Boolean
false
DESFire File Number
File number of the locker segment 2 on the data carriers
Integer
2
Start date
Mode
Selection of the LockerCheckin Mode for the Start Date
None: Value will not be changed
Delay: Sets the start date to now + start date value
Time: Sets the start date to today at start date value
Forever: Sets the start date to valid forever
Selection
None / Delay /
Tiime / Forever
Hours
Hours of start date
Integer
0 .. 23
Minutes
Minutes of start date
Integer
0 .. 59
End date
Mode
Selection of the LockerCheckin Mode for the End Date
None: Value will not be changed
Delay: Sets the expiry date to now + expiry date value
Time: Sets the expiry date to today at expiry date value
Forever: Sets the expiry date to valid forever
Selection
None / Delay /
Tiime / Forever
Hours
Hours of end date
Integer
0 .. 23
Minutes
Minutes of end date
Integer
0 .. 59
Third party
(e.g. for GAT Access 6100 F Upgrade, see "5.5. Configuration of Offline Emergency Mode for a GAT Access
– for some settings a special licence is required)
Position on Card Base
Segment number of the third party segment on data carriers
Integer
1
Block Number
Block number of the third party segment
Integer
0
Mask
The block, that is read from a data carrier, is logical AND
combined with this mask value and then compared with the
Result value
Hex
00000000FFFF
FFFF000…
Result
If the value, which results from logical AND combination of
the read block data from the data carrier and the Mask
value above, matches the Result value, access is granted
Hex
00000000AD33
6000…..
Read
Select, if a third party segment shall be read from the data
carriers
Boolean
False
Segment ID
ID number of the third party segment
Integer
60
Data start
Block number (for MIFARE and ISO 15693 data carriers) or
byte number (for LEGIC data carriers) to start reading from
Integer
0
Data length
Number of blocks (for MIFARE and ISO 15693 data
carriers, min. = 2 blocks, max. = 3 blocks) or number of
bytes (for LEGIC data carriers) to read.
Integer
16
Position on Card
Segment number of the third party segment
Integer
13
Fingerprint
Position on Card Base
Segment position of the finger print base sector on the
data carriers
Integer
6
Timeouts
Access allowed screen
Duration in milliseconds for the access allowed process.
For a GAT TimeAxx 6150 terminal, this setting deter-
mines the countdown time.
Integer
12000
Access denied screen
Duration in milliseconds for the access denied process.
Integer
3000
Remaining period break
Only for Countdown Mode. Determines, how long the
user can pause the countdown of a GAT TimeAxx 6150
until the whole countdown process is cancelled (input in
milliseconds). The resulting action after exceeding this
timeout is determined by the setting “Remaining period
mode” in the “Application -> General” section (see above).
Integer
60000
Summary of Contents for GAT ACCESS 6100
Page 10: ...GAT Access 6100 Terminal Series Table of Contents 10 HB_GAT ACCESS6100 EN_14 www gantner com ...
Page 34: ...GAT Access 6100 Terminal Series Installation 34 HB_GAT ACCESS6100 EN_14 www gantner com ...
Page 80: ...GAT Access 6100 Terminal Series Operation 80 HB_GAT ACCESS6100 EN_14 www gantner com ...
