Gantner GAT ACCESS 6100, Installation, Commissioning & Operation

Page: 56 / 99

GAT Access 6100 Terminal Series
Commissioning & Configuration
56
HB_GAT-ACCESS6100--EN_14
www.gantner.com
Device Licence License to enable special features of the device, for
example for the GAT Access 6100 F Upgrade (see "5.5.
Configuration of Offline Emergency Mode for a GAT
Access 6100 "). Hex
4895CA89…
Enrollment Station Indicates, if the license activates the Enrollment Station
functionality Boolean false
Disable Secure UID Indicates, if the license is used to deactivate the Secure
UID Boolean false
Offline Upgrade If this licence is loaded, the terminal is able to check
flags from the data carrier Boolean false
Thirdparty Validation Indicates, if the license is used for third party validation Boolean false
Enable GAT Shower Indicates, if the countdown functionality is activated. Boolean false
Remaining period mode Determines the action that will be performed after the
timeout during a remaining period break (see section
“Application” -> “Timeouts”) is exceeded. For this
function a special licence is required.
Cancel: The countdown process will be cancelled
Continue Relay off: The countdown will proceed, the
relay will be switched off
Continue Relay on: The countdown will proceed, the
relay will be switched on
Cancel
Continue Relay
off
Continue Relay
on
Third Party Write Enable/Disable the Third Party Write function. In order
to use this function the corresponding licence is
required. If this license is loaded, the terminal allows the
writing of data from the management software directly to
the data carrier. Boolean false
Second Ident with Card With this option it will be allowed to confirm the second
identification with the data carrier. Boolean true
Data handling
Deny if Checkin failed Access denied if the LockerCheck-In fails Boolean false
Check validity date Checks site number and validity date of data carriers,
when the GAT Access 6100 is in the Emergency Mode Boolean false
Locker 1
Read Indicates, if data must be read from the first locker
segment of the data carriers. Boolean true
Position on card Where the locker data 1 segment is located on data carriers Integer 1 .. 255
Clear number Clear the locker number from the data carrier. Boolean false
DESFire File Number File number of the locker segment 1 on the data carriers Integer 1
Start date
Mode Selection of the LockerCheckin Mode for the Start Date
None: Value will not be changed
Delay: Sets the start date to now + start date value
Time: Sets the start date to today at start date value
Forever: Sets the start date to forever valid Selection None / Delay /
Time / Forever
Hours Hours of start date Integer 0 .. 23
Minutes Minutes of start date Integer 0 .. 59
End date
Mode Selection of the LockerCheckin Mode for the End Date
None: Value will not be changed
Delay: Sets the expiry date to now + expiry date value
Time: Sets the expiry date to today at expiry date value
Forever: Sets the expiry date to forever valid Selection None / Delay /
Tiime / Forever
Hours Hours of end date Integer 0 .. 23
Minutes Minutes of end date Integer 0 .. 59