WARNING: Do not disconnect the high voltage cable with power on. After turning power
off, allow at least one minute before disconnecting electrical equipment.
Do not operate the control without a proper electrical ground or near water. The control may
be damaged and its safety reduced, if operated outside of its specifications.
Circuit boards may be destroyed by a small static discharge. To avoid damaging the boards,
use the following precautions:
•
Handle boards at approved ESD workstation.
•
Do not touch any electrical contacts.
•
Do not rub boards against any insulator that may build up a static charge.
•
When shipping boards, use approved ESD containers and packaging.
WARNING: Voltages up to 7000V are present in the DIGITEL MPC. Turn off power and
disconnect power cord before performing any service procedures in this section.
Digitel MPC Manual
Page 53 of 72