•
control cable from the DIGITEL MPC to the Remote TSP/NEG Control
•
high-current cable from the Remote TSP/NEG Control to the TSP/NEG
•
an AC input power cable
Figure I-2. Remote TSP/NEG Control Option.
High-Voltage/TSP Filament Interlock Option
The remote interlock allows disabling of either the high voltage outputs or TSP filament firing.
The interlock is installed at
J506
(on the back panel of the MPC) if the option is installed. A
loopback plug is shipped with the option along with a connector kit for custom configuration by
the user.
Digitel MPC Manual
Page 8 of 72
