Galvanic Applied Sciences 943-TGS, Operation Manual

Page: 69 / 112

Revision 1 69 6/27/2017
Table 6-1: Normal Values of Key Operating Parameters
Inspection Description Should be:
1 On/Off Line Indicator (Analysis
1 Panel)
• On Line (green)
2 Run/Stop Indicator
• Run (green)
3 Relay Indicators (Analysis 1
Panel)
• Status “Normal” (green)
•
Service “Normal” (green)
•
Mode “Run” (green)
• Control “Auto” (green)
4 Fault Indicators (Indicators
Panel)
• Cell Temperature (Green)
•
Probe Temperature (Green)
•
Measure Range (Green)
•
Reference Range (Green)
• Dark Range (Green)
• I/O Board (green)
5 Cell Temperature
(Typical Cell Temperature =
150
o
C/302
o
F) (Analysis 2
Panel)
•
Digital Indicator (within set point)
6 Probe Temperature
(Typical Cell Temperature =
150
o
C/302
o
F) (Analysis 2
Panel)
• Digital Indicator (within set point). This
parameter is used only when a probe RTD is
installed and the Control with RTD function is
selected
7 Cabinet Temperature (Analysis
2 Panel)
• Digital Indicator
8 Air Demand Output
• Digital - Indicating -5% to + 5%
•
Graphic Showing trend, last value on right side
9 H
2
S and SO
2
• Digital – Separate indications in mole %
•
Graphic Dual trace trend, last value on right
side