Galvanic Applied Sciences 943-TGS, Operation Manual

Page: 38 / 112

Revision 1 38 6/27/2017
4.3.6 Graphic Display
The Graphic display of the air demand is updated once per second. The time and intensity
scales can be set on the Config panel (Section 4.8).
4.4 Analysis 2 Panel
The Analysis 2 panel (Figure 4-3) presents the present H
2
S and SO
2
concentrations in a
single graphic window. The default full scale values and the time scale can be set on the
Config
panel (Section 4.8) a range between 0% and the configured full scale analog output
concentration. The default full scale values are determined at software restart to a range
between ± the configured full scale analog output value for the Air Demand signal.
Figure 4-4: Analysis 2 Panel
The default full scale values and the time scale can be set on the
Config
panel (Section 4.8)
using a range between 0% and the configured full scale analog output concentration. The
default full scale values are determined at software restart to a range between ± the
configured full scale analog output value for the signals.
The
Cell Pressure
and
Temperature
fields indicate the instantaneous readings for these
parameters, updated every second.