Galvanic Applied Sciences 943-TGS, Operation Manual

Page: 66 / 112

Revision 1 66 6/27/2017
5.4.1 Changing the Passwords
The Change Password dialog box (Figure 5-14) is used to change the factory password and
the operator password. The operator level password allows the user to change parameters
on the Configuration/Parameters page. The factory level password allows the user to change
parameters on the Configuration/Parameters page and the Factory Parameters page
Figure 5-14: Change Password Dialog Box
To change the operator password:
a) Click on the
Change to Update Mode
field and enter the factory password. The default
factory password is 9713.
b) Click on the
Change Password
button. The
Change Password
dialog box will be
presented as shown in Figure 5-12. Leave the
Factory Password
box unchecked.
c) Enter the current operator password in the Enter Old Password field. Enter the desired
new password in each of the
Enter New Password (twice
) fields.
To change the factory password repeat the above steps but place a checkmark in the Factory
Password checkbox.
To cancel the password, change click on the X at the upper right hand corner of the dialog
box.