Galil DMC-2010, User Manual

Page: 157 / 267

_LRn Returns status of Reverse Limit switch input of axis ‘n’ (equals 0 or 1)
UL *Returns the number of available variables
TIME Free-Running Real Time Clock (off by 2.4% - Resets with power-on).
NOTE:
TIME does not use an underscore character (_) as other keywords.
* These keywords have corresponding commands while the keywords _LF, _LR, and TIME do not
have any associated commands. All keywords are listed in the Command Summary.
v1=_LFA Assign v1 the state of the Forward Limit Switch on the A-axis
v3=TIME Assign v3 the current value of the time clock
v4=_HMD Assign v4 the logical state of the Home input on the D-axis
Arrays
For storing and collecting numerical data, the DMC-2x00 provides array space for 8000 elements.
The arrays are one dimensional and up to 30 different arrays may be defined. Each array element has a
numeric range of 4 bytes of integer (2
31
) followed by two bytes of fraction (+/-2,147,483,647.9999).
Arrays can be used to capture real-time data, such as position, torque and analog input values. In the
contouring mode, arrays are convenient for holding the points of a position trajectory in a record and
playback application.
Defining Arrays
An array is defined with the command DM. The user must specify a name and the number of entries
to be held in the array. An array name can contain up to eight characters, starting with an uppercase
alphabetic character. The number of entries in the defined array is enclosed in [ ].
DM posA[7] Defines an array names posA with seven entries
DM speed[100] Defines an array named speed with 100 entries
DM posA[0] Frees array space
Assignment of Array Entries
Like variables, each array element can be assigned a value. Assigned values can be numbers or
returned values from instructions, functions and keywords.
Array elements are addressed starting at count 0. For example the first element in the posA array
(defined with the DM command, DM posA[7]) would be specified as posA[0].
Values are assigned to array entries using the equal sign. Assignments are made one element at a time
by specifying the element number with the associated array name.
NOTE: Arrays must be defined using the command, DM, before assigning entry values.
DM speed[10] Dimension Speed Array
speed[1]=7650.2 Assigns the first element of the array the value 7650.2
speed[1]= Returns array element value
posXA[10]=_TPA Assigns the 10th element the position of A
DMC-2X00 Chapter 7 Application Programming
y
147