Galil DMC-2010, User Manual

Page: 62 / 267

The second method for setting an IP address is to send the IA command through the DMC-2100/2200
main RS-232 port. The IP address you want to assign may be entered as a 4 byte number delimited by
commas (industry standard uses periods) or a signed 32 bit number (Ex. IA 124,51,29,31 or IA
2083724575). Type in BN to save the IP address to the controller's non-volatile memory.
NOTE:
Galil strongly recommends that the IP address selected is not one that can be accessed across
the Gateway. The Gateway is an application that controls communication between an internal network
and the outside world.
The third level of Ethernet addressing is the UDP or TCP port number. The Galil controller does not
require a specific port number. The port number is established by the client or master each time it
connects to the controller.
52
•
Chapter 4 Communication DMC-2X00