170
Parameter
Description
OSD
vehicles and non-motor vehicles in the detection area and generates
the statistical report. If
Traffic Flow Stat
is disabled, the report has no
statistical data.
Select
OSD
to display the statistical result on the preview interface. To
clear the statistical result, click
Clear
.
Snap Mode
Select the snap mode:
Optimized Snap
and
Tripwire
.
Relay-out
Select the Relay-out check box, and when alarm is triggered, the
system interacts with the linked alarm devices.
Alarm Delay
The Alarm linkage keeps running for the configured time after alarm is
ended.
Step 5 Set arming periods and alarm linkage action. For details, see "5.1.1 Alarm Linkage."
Step 6 Click
Save
.
Verification
The ANPR result is displayed on the live interface. See Figure 5-65.
The plate no. and attribute information of vehicle are displayed at the right side.
Click the picture in the display area, and the detailed information is displayed.
Figure 5-65 ANPR result
5.15.2 Setting Picture Overlay
Set overlay of motor vehicle.
Step 1 Select
Setting > Event > ANPR > Picture
.
The
Picture
interface is displayed. See Figure 5-66.
