Galaxy Hunter Series Manual Download Page 193

Page: 193 / 200

185

Step 3 Click

Save

to finish configuration.

6.4.2 Default

Restore the device to default configuration or factory settings.

This function will restore the device to default configuration or factory setting.

Select

Setting > System > Default

. The

Default

interface is displayed. See Figure 6-8.



Click

Default

, and then all the configurations except IP address and account are reset to

default.



Click

Factory Default

, and all the configurations are reset to factory settings.

Figure 6-8 Default

6.5 Upgrade

Upgrading to the latest system can perfect camera functions and improve stability.

If wrong upgrade file has been used, restart the device; otherwise some functions might not

work properly.

Step 1 Select

Setting > System > Upgrade

The

Upgrade

interface is displayed. See Figure 6-9.

Figure 6-9 Upgrade

Step 2 Select upgrading method according to the actual needs.



File Upgrade

1) Click

Browse

, and then upload upgrade file.

The upgrade file should be a .bin file.

2) Click

Upgrade

Summary of Contents for Hunter Series









































































































































































































Search results

Summary of Contents for Hunter Series

Reviews:

Related manuals for Hunter Series

Brands by name

Popular brands

Galaxy Hunter Series, Manual

Search results

Summary of Contents for Hunter Series

Reviews:

Related manuals for Hunter Series

Brands by name

Popular brands