Galaxy Hunter Series, Manual

Page: 85 / 200

77
Mailbox SMTP server
Authen
tication
Port Description
QQ smtp.qq.com
SSL 465

The authentication type cannot be
None .

You need to enable SMTP service in
your mailbox.
 The authentication code is required,
the QQ password or email password
is not applicable.
Authentication code: The code you receive
when enabling SMTP service.
TLS 587
163 smtp.163.com
SSL 465/994

You need to enable SMTP service in
your mailbox.

The authentication code is required;
the email password is not applicable.
Authentication code: the code you receive
when enabling SMTP service.
TLS 25
none 25
Sina
smtp.sina.co
m
SSL 465
Enable SMTP service in your mailbox.
none 25
126 smtp.126.com none 25 Enable SMTP service in your mailbox.
Step 3 Click Save .
Step 4 Click Test to test whether the emails can be sent and received successfully.
4.6.6 UPnP
UPnP (Universal Plug and Play), a protocol that establishes mapping relation between local
area and wide area networks. This function enables you to visit local area device through wide
area IP address.
Preparation
 Make sure the UPnP service is installed in the system.

Log in the router, and configure WAN IP address to set up internet connection.
 Enable UPnP in the router.

Connect your device to the LAN port of the router.
 Select Setting > Network > TCP/IP , in IP Address , enter the local area IP address of the
router or select DHCP and acquires IP address automatically.
Procedure
Step 1 Select Setting > Network > UPnP .
The UPnP interface is displayed. See Figure 4-73.