107
Parameter
Description
Address
The corresponding device address. It is 1 by default.
Make sure that the address is the device address; otherwise you
cannot control the device.
Baud Rate
Select the boud rate for the camera. It is 9600 by default.
Date Bit
It is 8 by default.
Stop BIt
It is 1 by default.
Parity
It is
None
by default.
Step 3 Click
Save
.
4.8.6.2 External Light
You need to configure external light mode when the external light is used.
Preparation
Connect external light with RS-485 port.
You have configured serial port parameters. For details, see "4.8.6.1 Serial Port Settings."
Procedure
Step 1 Select
Setting > System > Peripheral > External Light
.
The
External Light
interface is displayed. See Figure 4-112.
Figure 4-112 External light
Step 2 Configure external light work mode. For details, see Table 4-42.
Table 4-42 Description of external light parameters
Parameter
Description
