169
5.15.1 Scene Configuration
Configure non-motor vehicle detection.
Preparation
Select
Setting
>
Event
>
Smart Plan
, and then enable
ANPR
.
Procedure
Step 1 Select
Setting > Event > ANPR > Scene Set
.
The
Scene Set
interface is displayed. See Figure 5-64.
Figure 5-64 Scene set (ANPR)
Step 2 Click
Draw
to draw a detect region and an exclude region in the image.
Detect region: The region that needs to be detected.
Exclude region: The region that does not need to be detected. Click
Modify
to
modify the drawn region.
Click
Clear
at the right side to draw the detection area again.
Step 3 Click
Draw Target
next to
Target Filter
to draw the maximum size and minimum size
for the detection target in the image.
Step 4 Configure parameters. See Table 5-21.
Table 5-21 Description of scene set parameters (ANPR)
Parameter
Description
Traffic Flow Statistics
Select
Traffic Flow Stat
, and the device detects the number of motor
