G.Weike Laser
Profession Laser Manufacturer more than 15 Years.
56
Chart6-1
The
mainten
ance
period
Maintenance content
Maintain the target
E
ve
ry
da
y
1.Check the temperature setting is normal cold
water machine(Set temperature 20±1
℃
)
To ensure the supply of
the laser cooling water
temperature is normal
2
.
Check whether the chiller water seal, water
temperature, water pressure is achieved
Ensure
the
normal
operation of equipment,
to prevent leakage
3
.
Cold water machine working environment
keep dry, clean and ventilated
Running is good for cold
water machine
E
ve
ry
m
on
th
1
.
Use will be cleaner or high quality soap to
clear the dirt on the surface of cold water
machine, please do not use benzene, acids,
flour, steel brush, such as hot water to clean
Ensure that the cold
water
machine
the
surface clean
2
.
Test whether condenser blocked by dirt,
please use compressed air or brush to remove
the dust in the condenser
Ensure
the
normal
operation
of
the
condenser
3
.
Clean air filter
：
A
.
Open the unit panel of air filters, air filters
will unit to pull them up and pull outward
；
B
.
Can use a vacuum cleaner, air spray gun
and brush will filter dust removal, cleaning
has been completed, if the screen pack damp,
please reload after shaking to dry please refer
picture 6-3.
C
.
Dirt cleaning cycle: every two weeks, if
serious, please don't clean on a regular basis.
To
prevent
cooling
refrigeration poor, poor
and
burn
out water
pumps and compressors
4
.
Check the water tank water quality situation
and follow up
Good water quality, to
ensure normal operation
of the laser
5
.
Check whether there is cold water machine
pipeline leakage phenomenon
Ensure that cold water
machine without slack
phenomenon
