G.Weike Laser
Profession Laser Manufacturer more than 15 Years.
51
17. Air temperature at 0 degrees Celsius for a long time down, should be the
water cooler, laser and water pipelines in the cooling water discharge, so as to
avoid the temperature is too low to freeze water, causing damage to
equipment and pipelines.
18. Finish the work should be close cylinders and gas curb stranded gas
release, prolong the service life of the gas pipelines. At the same time, the X
axis, Y axis moves to the machine to prevent screw for gravity deformation
affects the cutting precision.
19. The equipment should be kept in a dry, well ventilated environment with no
violent vibration of other industrial equipment.
20. Water cooling machine cooling water should use distilled water or pure
water, fifteen days to replace the one time; protect the lens one day to clean,
keep clean.
21. Laser cutting head should be cleaned every day, keep clean, prevent dust
into the laser head, causing damage to the lens.
22. When something needs to be left in the operation of the equipment, the
operating handle is turned off, and the operating table is hung with "without
permission, no operation" warning board to prevent the equipment damage
and personnel damage caused by misuse of others.
23. Regularly check the drive parts fastening screws are loose, regular
cleaning guide, screw or rack oil
24. Equipment in the process of maintenance or repair interruption of power
supply, is strictly prohibited to live repair or maintenance
5.8.3 Note on the use of temperature in spring and winter
Equipment is located in the ambient temperature of less than 0 degrees,
the water cooler to keep running state
The boot environment temperature of water cooling machine shall not be
less than 4 degrees, (factory setting temperature 4-25 degrees, the water
temperature is less than 25 degrees automatic heating; water temperature
is less than 4 degrees water cooling machine does not work, at this time
can be heated with warm water or other heating methods).
Laser temperature shall not be less than 0 degrees, the temperature of
circulating water in 20 degrees -22 degrees, less than 20 degrees can not be
used.
Note
:
if the restricted conditions, the water cooling machine cannot be all-
weather open, when the environment temperature is below 0 degrees,
user should drain all the water in the water cooling machine or add heat
preservation device on the surface of the water cooling machine. When
the water cooling machine is off,please drain the water in the fiber laser
source.Putting antifreeze into the water cooling machine is prohibited!
5.9 After installation and debugging acceptance test program,
method and judgment
