G-Technology G SPEED STUDIO XL Product Manual Download

Page: 79 / 119

Configuring G-SPEED Studio XL

G SPEED

STUDIO

with Thunderbolt™

p. 79

Viewing a List of Logical Drives

To view a list of logical drives, perform one of the following actions:

• Click the

Logical Drive

icon.

• From the Storage menu, choose

Logical Drive

The list of logical drives will appear. Logical drive information includes:

•

– LD0, LD1, etc.

•

Alias

– If assigned

•

Status

- Normal, Critical or Offline icon

•

Capacity

– Data capacity of the logical drive

•

RAID Level

– Set when the logical drive was created

•

Stripe

– Set when the logical drive was created

•

Cache Policy

– Read and write cache settings

•

Array ID

– ID number of the disk array where this logical drive was created

Viewing Logical Drive Information

To view logical drive information:
1. Do one of the following actions:

• Click the

Logical Drive

icon.

• From the Storage menu, choose

Logical Drive

. The list of logical drives will appear.

2. Mouse-over the logical drive you want, then click the

View

button.

Logical Drive information will display, including:

•

Logical Drive ID

– LD0, LD1, etc.

•

Alias

– If assigned

•

Array ID

– ID number of the disk array where this logical drive was created

•

RAID Level

– Set when the logical drive was created

•

Operational Status

– OK, Critical or Offline

Summary of Contents for G SPEED STUDIO XL
























































































































Search results

Summary of Contents for G SPEED STUDIO XL

Reviews:

Related manuals for G SPEED STUDIO XL

Brands by name

Popular brands

G-Technology G SPEED STUDIO XL, Product Manual

Search results

Summary of Contents for G SPEED STUDIO XL

Reviews:

Related manuals for G SPEED STUDIO XL

Brands by name

Popular brands