G-Technology G SPEED STUDIO XL Product Manual Download Page 60

Page: 60 / 119

Configuring G-SPEED Studio XL

G SPEED

STUDIO

with Thunderbolt™

p. 60

Running the Locate function to identify a physical drive:

Drive power/status LEDs blink
blue and orange

Changing Global Physical Drive Settings

To change global physical drive settings:

1. Click the

Physical Drive

icon

2. Click the

Global Physical Drive Settings

button

3. Check the following boxes to enable functionality; uncheck them to disable.

•  Enable Write Cache
•  Enable Read Look Ahead Cache
•  Enable Command Queuing

4. Click the

Save

button.

5. Click the

icon to close the settings panel.

Changing Individual Physical Drive Settings

Summary of Contents for G SPEED STUDIO XL
























































































































Search results

Summary of Contents for G SPEED STUDIO XL

Reviews:

Related manuals for G SPEED STUDIO XL

Brands by name

Popular brands

G-Technology G SPEED STUDIO XL, Product Manual

Search results

Summary of Contents for G SPEED STUDIO XL

Reviews:

Related manuals for G SPEED STUDIO XL

Brands by name

Popular brands