Configuring G-SPEED Studio XL
G SPEED
STUDIO
XL
with Thunderbolt™
p. 49
Changing Redundancy Check Settings
To change Redundancy Check settings:
1. Click on the Background Activities icon.
2. Click the Settings button.
3. Click the Redundancy Check Rate drop-down menu and choose a rate:
• Low
: Fewer system resources are required for redundancy checking, leaving more resources
for data read/write operations.
• Medium:
Balances system resources between redundancy checking and data read/write
operations.
•
High:
Allocates more system resources to Redundancy Check and fewer to data read/write
operations.
4. Click the Confirm button.
5. Click the X icon to close the background activities panel.
Initialization
Initialization is normally done to logical drives after they are created from a disk array. Initialization
sets all data bits in the logical drive to zero. This action is useful because there may be residual
(possibly sensitive) data on logical drives left from earlier configurations. For this reason,
initialization is recommended whenever you create a logical drive.
Note: You cannot access a logical drive while it is initializing.
See
Initializing a Logical Drive
.
