Configuring G-SPEED Studio XL
G SPEED
STUDIO
XL
with Thunderbolt™
p. 42
Write Back Cache Flush Interval
– Enter a value into the field from 1 to 12 seconds.
Enclosure Polling Interval –
15 to 255 seconds.
• Adaptive Writeback Cache – Check the box to enable or uncheck to disable.
• Forced Read Ahead – Check the box to enable or uncheck to disable.
• Pilot LED Brightness – High, Medium, Low, Off
• Enable HDD Park Ahead(Level 1)
• HDD Park Ahead Interval (10-1440)
• Enable HDD Low Rotation Speed (Level 2)
• HDD Low Rotation Speed Interaval (10-1440)
• Enable HDD Idle Spin Down(Level 3)
• HDD Idle Spin Down Interval (10-1440)
3. Click the
Save
button.
4. Click the
X
icon to close the settings panel.
Changing Buzzer Settings
To change buzzer settings:
1. From the
Dashboard
icon, select
Controller
.
2. Mouse-over the buzzer, then click the
Settings
button.
3. Check the
Enable Buzzer
box to enable the buzzer or uncheck the box to disable.
4. Click the
Save
button.
