Configuring G-SPEED Studio XL
G SPEED
STUDIO
XL
with Thunderbolt™
p. 61
To change individual physical drive settings:
1. Click the
Physical Drive
icon.
2. Mouse-over the physical drive you want, then click the
Settings
button.
3. Make changes as needed:
• Enter, change or delete the alias in the Alias field.
• Choose Unconfigured or PassThru Configuration.
• Unconfigured drives are not visible to your computer. You will use these to make disk arrays.
PassThru drives are visible to your computer and are configured as individual drives. They
cannot be used to make a disk array.
4. Click the
Save
button.
5. Click the
X
icon to close the settings panel.
Changing Physical Drive SMART Log Settings
To change physical drive SMART log settings:
1. Click the
Physical Drive
icon.
2. Mouse-over the physical drive you want, then click the
Settings
button.
3. Click the SMART Log Settings tab.
4. Check the box to enable the SMART log.
5. Click the
Save
button.
6. Click the
X
icon to close the settings panel.