G-Technology G SPEED STUDIO XL Product Manual Download Page 59

Page: 59 / 119

Configuring G-SPEED Studio XL

G SPEED

STUDIO

with Thunderbolt™

p. 59

Viewing Physical Drive SMART Log Information

To view physical drive SMART Log information:

1. Click the

Physical Drive

icon.

2. Mouse-over the physical drive you want, then click the

View

button.

3. Click the

SMART Log

tab.

SMART Log information includes:

•  Physical Drive ID
•  SMART Support – Yes or No, depending on the drive
•  SMART Status – Enabled or disabled

• SMART Health Status – OK is normal

*Adjustable under

Changing Controller Settings

4. Click the

icon to close the settings panel.

Locating a Physical Drive

This feature causes the drive carrier LEDs to blink for one minute to help you locate the physical drive.
To locate a physical drive:

1. Click the

Physical Drive

icon.

2. Mouse-over the physical drive you want, then click the

Locate

button. The drive power/status

LED for the drive carrier holding that drive will blink blue and orange for one minute.

Summary of Contents for G SPEED STUDIO XL
























































































































Search results

Summary of Contents for G SPEED STUDIO XL

Reviews:

Related manuals for G SPEED STUDIO XL

Brands by name

Popular brands

G-Technology G SPEED STUDIO XL, Product Manual

Search results

Summary of Contents for G SPEED STUDIO XL

Reviews:

Related manuals for G SPEED STUDIO XL

Brands by name

Popular brands