Configuring G-SPEED Studio XL
G SPEED
STUDIO
XL
with Thunderbolt™
p. 76
Preparing a Disk Array for Transport
This feature prepares the physical drives that make up the disk array to be removed from the enclosure
and installed in a different G-SPEED Studio XL enclosure. To prepare a disk array for transport:
1. Perform one of the following actions:
• From the Dashboard window, click the
Disk Array
link.
• From the Storage menu, choose
Disk Array
.
2. Mouse-over the disk array you want, then click the
Transport
button.
3. In the Confirmation box, type the word “CONFIRM” in the field provided, then click the
Confirm
button. The disk array status will change to Transport Ready.
4. Remove the physical drives and install them in their new location.
See
Replacing a Physical Drive
for more information.
Rebuilding a Disk Array
When you rebuild a disk array, you actually rebuild data on one physical drive from redundant data
maintained on other drives. If there is no spare drive of adequate capacity, you must replace the failed
drive with an unconfigured physical drive, then perform a
Manual Rebuild
.
On the carrier with the failed drive, the drive power/ status LED will be red.
Drive carrier LEDs for a dead or failed drive:
Drive Module LED (red)
indicating an issue